Varusteet

BASIC EQUIPMENT FOR LAIMET 120, STATIONARY UNIT

  • Strong steel frame
  • Steel profile saw table, 8 meters
  • Steel pipe rollers with ball bearings
  • Hydraulic feeding unit
  • Blade shaft 55 mm and hydraulic blade guiding equipment
  • Mechanical dimensioning system
  • Feeding roller, operated by a separate hydraulic motor
  • Stationary support legs
  • Slab support stand
  • Safety equipment

Extra equipment:

  • Sawdust fan 4 kW / 400 V or with V-belt drive from the blade shaft
  • Sharpening / grinding device 0,55 kW / 400 V or 12 V
  • Electric main motor 37 kW or 45 kW
  • Fastening rails for electric motor 37 kW or 45 kW
  • Automatic delta-star starter (for 37 kW or 45 kW) with the DC-brake and for 4 kW fan motor
  • V-belt transmission for 37 kW or 45 kW main electric motor or V-belt grooved shaft transmission for tractor drive setup
  • U-J shaft for tractor drive
  • Slipper bars for ready sawn timber and waste slabs
  • Hydraulic discharge equipment for sawn timber
  • Self bearing exit end for the discharge equipment
  • Separate hydraulic pump unit with ekectric motor 5,5 kW / 400 V
  • Thermostat controlled heating element in the oil tank
  • Double chain for the saw table + longer receiving frame end
  • Hydraulic log directing / turning device
  • Lengthwise moving (by hydraulics) log directing / turning device
  • Digital dimensioning equipment
  • Hydraulic block positioning system to the digital dimensioning equipment
  • Hydraulic TOPSAW-equipment
  • TOPSAW
  • equipment with the electric motor 13,2 kW or 18,0 kW
  • Hydraulic log hook
  • Hydraulic pre-parker
  • Hydraulic slab wheel on the operators side
  • Hydraulic log lifter
  • Hydraulic log rationing unit
  • Operators platform
  • Heating for the operators platform
  • Rubber vulganized, quiet table rollers
  • Double chain for the saw table + longer receiving frame end
  • Longer double middle frame balks (6 m) in the case of stationary log turning device
  • Extended length, saw table and frame construction
  • The load sensing hydraulic system, incl. the piston pump and 11 kW electric motor

BASIC EQUIPMENT FOR LAIMET 120, PORTABLE UNIT

  • Strong steel frame
  • Steel profile saw table, 8 meters
  • Steel pipe rollers with ball bearings
  • Hydraulic feeding unit
  • Blade shaft 55 mm and hydraulic blade guiding equipment
  • Mechanical dimensioning system
  • Feeding roller, operated by a separate hydraulic motor
  • Tow bar for tractor transportation
  • Hydraulic transport axle
  • Transport wheels 400 x 15,5
  • Four hydraulic support legs in the middle section, mechanical support legs at the end sections
  • Hydraulically liftered and lowered exit end for the transport purposes
  • Weather canopy and working lights
  • Tail end lights
  • Tool box
  • Hydraulic log lifters
  • Saw dust duct with support post
  • Slab support stand
  • Operators platform
  • Safety equipment

Extra equipment:

  • Sawdust fan V-belt driven from the blade shaft
  • Sharpening / grinding device 12 V motor
  • V-belt grooved shaft transmission for tractor drive setup
  • U-J shaft for tractor drive
  • Slipper bars for ready sawn timber and waste slabs
  • Hydraulic discharge equipment for sawn timber
  • Hydraulic log directing / turning device
  • Lengthwise moving (by hydraulics) log directing / turning device
  • Digital dimensioning equipment
  • Hydraulic block positioning system to the digital dimensioning equipment
  • Hydraulic TOPSAW -equipment
  • Hydraulic log hook
  • Hydraulic pre-parker
  • Hydraulic slab wheel on the operators side
  • Double chain for the saw table + longer receiving frame end
  • Rubber vulganized, quiet table rollers
  • Heating for the operators platform

Comments are closed